Disinfection & Sanitisation in Dubai, Sharjah & Abu Dhabi

Cleaning and disinfection are two steps, in that order. Cleaning physically removes soil and a large share of the microbial load with it. Disinfection then reduces what remains on the cleaned surface. Skipping the first step undermines the second, and it is the single most common failure in this category of work.

Contact time is the other thing that gets skipped. Every disinfectant has a dwell time on the label — the period the surface must stay visibly wet for the claimed reduction to occur. Wiping a surface dry immediately after application means the product never had the time it needed. Our technicians work to the product label rather than to whatever is quickest.

This is also why high-touch points matter more than floor area. Door handles, push plates, light switches, lift buttons, shared keyboards and phones, taps, flush handles, handrails and desk edges are where transmission actually happens. A visit that covers those thoroughly does more than one that fogs a large volume and rushes the details.

Fogging disperses a fine mist of disinfectant to cover surfaces across a space quickly, including ones awkward to reach by hand. It is useful for large or complex areas, for a whole-room treatment after a confirmed case of illness, and where speed matters across many rooms.

It is not a substitute for surface work. Fog settles on exposed surfaces; it does not penetrate soil, it reaches shielded areas poorly, and it does not clean. A room that is fogged but not cleaned and hand-wiped at high-touch points has had the least effective part of the job done and the most effective part missed. We use fogging as a complement to surface disinfection, not instead of it, and we will say so when a client asks for fogging alone.

Practical constraints matter too. Fogged areas need to be vacated during application and for a re-entry period afterwards, sensitive electronics and food need covering or removal, and ventilation has to be managed. We agree all of that before the visit so nobody is locked out of a space unexpectedly.

We use approved disinfectant products, applied at label dilution and label contact time, by technicians trained in their use and working under our ISO 45001:2018 health and safety system and ISO 14001:2015 environmental system. Product data sheets are available for your records, which matters for schools, clinics and food premises where an inspector may ask.

What we will not do is quote a percentage kill rate for your premises. Laboratory efficacy figures are produced under controlled conditions on defined organisms and standard soil loads; they do not transfer to a real office with real surfaces and real occupancy. We will tell you what product was used, where, at what dilution and for what contact time, which is a claim we can actually stand behind.

We also do not carry out microbial swab testing or environmental sampling, and we do not certify a space as sterile — no service applied to an occupied building can make that claim honestly. If you need verification, ATP or swab testing is specialist work you should commission independently, which also makes it more credible than a contractor grading its own work.